BarrelfishWiki

This article describes how to connect to an NFS-Share in Barrelfish.

Requirements

Before we can connect to a NFS-Share we need a server that provides us with this functionality. In this article we assume that the server is located at 10.0.0.2 and exports the folder /home/barrelfish via NFSv3 to the Barrelfish machine. Setting up the server is out of the scope of this article.

Connection

We first create a folder

mkdir /nfs

and can then connect to the NFS-Share

mount MOUNTPOINT URI

In our concrete example the last command would look as following.

mount /nfs nfs://10.0.0.2/home/barrelfish

Troubleshooting

If you get the following error after the mount command

ERROR: fish.0 in mount() ../usr/fish/fish.c:477
ERROR: in vfs_mount /nfs nfs://10.0.0.2/home/barrelfish
Failure: (            nfs)    Permission denied [NFS_ERR_MNT_ACCES]

and the log messages of the server shows

mountd[31633]: refused mount request from 10.0.0.2 for /home/barrelfish (/home/barrelfish): illegal port 33288

then you have to edit your /etc/exports on the server. The problem here is that the request originated from an internet port less than IPPORT_RESERVED (1024) which is usually prohibited by NFS. To allow these request, add the insecure option to the corresponding share. The /etc/exports could look as following:

/home/barrelfish 10.0.0.0/255.255.0.0(rw,insecure)

BarrelfishWiki: nfs (last edited 2011-09-02 18:58:26 by RaphaelFuchs)